New Zealand Gold Prospecting & Metal Detecting Forums Archive

The forum has moved to community.paydirt.co.nz, see you there!

This forum is now an archive to preserve the knowledge and finds posted here.

5 Pages12 3 >»

hunting 0.1 inch gold grain underground 40 inches - dig is hard work for hunting gold

metalprobe		Posted : Tuesday, 5 February 2013 2:31:45 PM(UTC)
Rank: Gold Flake Groups: Registered Joined: 24/01/2012(UTC) Posts: 23 Location: hongkong Thanks: 2 times		hi any one can find 0.1 inch gold grain underground 40 inches or underwater my solution will help you detecting easy. The underground detector coil dim. over 10 inch and normally the gold grain size is very small less than 0.1 inch, when detecting, after locating an area with your underground metal detector, you can pinpoint the coin or ring easily with a pinointer If you use big size probe it is hard enough to push into to mud by hands and you have to hard dig and it is one of the hunting problems even strong Veenie has to face to...... LMP Metal Probe is a professional Long Pole Gold ( Grain ) pinpointer Equiped with flashlight and Pole length: 40 inch Communicates with: a. buzzer alarm b. LED light ( green for power, red for warning ) c. Vibration alarm Adjustable control board F - flashlight power ON/OFF C - charger DC hole S - sensitivity adjustment B - Light brightness adjustment Probe Handle: 7.8" ( 200 mm) Probe Pole: 40" Probe end dim.: 1.4cm (0.55 inches) Handle End: 4 cm (1.6 inches) Gold Grain 0.12 inches / 3 mm ) depth: Tip detecting > 0.04 inch ( 1mm ) Side detecting > 0.06 inch ( 1.5 mm ) LED flashlight brightness distance 3 meters I give the metal probe to Veenie and do hope to help him easy hunting. Edited by user Wednesday, 6 February 2013 3:58:01 PM(UTC) \| Reason: Not specified
		WWW

gavin		Posted : Tuesday, 5 February 2013 3:29:16 PM(UTC)
Rank: Gold Ingot Groups: Administrators, Registered Joined: 20/02/2010(UTC) Posts: 1,326 Location: Christchurch Thanks: 736 times Was thanked: 535 time(s) in 287 post(s)		You'd have to be very luck to push that in the ground and happen to pop it on a wee nugget! Great that you can see the LED light flashing 3 meters away. Not sure why you'd need to see it from 3 meters away? Edited by user Tuesday, 5 February 2013 3:30:37 PM(UTC) \| Reason: Not specified
		WWW

simon		Posted : Tuesday, 5 February 2013 3:34:12 PM(UTC)
Rank: Gold Ingot Groups: Registered Joined: 7/01/2011(UTC) Posts: 789 Location: Central Otago Thanks: 33 times Was thanked: 239 time(s) in 150 post(s)		i haven't even wasted my time reading this shite. more spam from the asian continent. if that contraption whatever it is, works, i would eat my hat.
		WWW

oroplata		Posted : Tuesday, 5 February 2013 3:49:23 PM(UTC)
Rank: Gold Ingot Groups: Registered, Moderators Joined: 16/06/2011(UTC) Posts: 1,040 Location: Christchurch Thanks: 23 times Was thanked: 211 time(s) in 152 post(s)		Whether it actually works or not is fairly irrelevant I reckon. After digging about 3 holes down through the gravel in the hope that there JUST HAPPENED to be a large enough nugget there to set the thing off - I'd be walking away. Better to invest in a D8 and dig the whole shebang up.
		WWW

andy		Posted : Tuesday, 5 February 2013 4:13:50 PM(UTC)
Rank: Gold Ingot Groups: Registered Joined: 13/12/2012(UTC) Posts: 471 Location: ngongotaha rotorua Thanks: 70 times Was thanked: 88 time(s) in 72 post(s)		Oooh I want one.....
		ATpro ACE250 GC1010 teknetics Eurotek Pro

Lammerlaw		Posted : Tuesday, 5 February 2013 4:19:09 PM(UTC)
Rank: Gold Ingot Groups: Registered Joined: 24/05/2011(UTC) Posts: 1,721 Thanks: 72 times Was thanked: 579 time(s) in 396 post(s)		Hi Mr Metalprobe - Isnt this the same device that the nice surgeon man used to band my haemorrhoids at the hospital last year? You gave one to Veenie? Will you give me one as well? Is Veenie the same guy as Veenie the Weener Would you send one out to us for testing and evaluation and if we like it then we might even order some from you - if your product is as good as you claim then I am sure that you will send a complimentary one for evaluation and testing...dont send Veenie the weener though - just send the device and a small gold nugget to test it on. If you are worried about it getting lost in transit then you might like to get someone to bring it out to New Zealand to deliver it - preferably a Geisha girl or a Lady of ill Repute with loose morals. Edited by user Tuesday, 5 February 2013 5:45:11 PM(UTC) \| Reason: Not specified

andy		Posted : Tuesday, 5 February 2013 4:31:31 PM(UTC)
Rank: Gold Ingot Groups: Registered Joined: 13/12/2012(UTC) Posts: 471 Location: ngongotaha rotorua Thanks: 70 times Was thanked: 88 time(s) in 72 post(s)		Infact just the nugget will do lol.....
		ATpro ACE250 GC1010 teknetics Eurotek Pro

Shilo		Posted : Tuesday, 5 February 2013 4:39:21 PM(UTC)
Rank: Gold Ingot Medals: Groups: Registered Joined: 29/01/2011(UTC) Posts: 573 Location: Kawhia Thanks: 17 times Was thanked: 285 time(s) in 185 post(s)		Originally Posted by: metalprobe Gold Grain 0.12 inches / 3 mm ) depth: Tip detecting > 0.04 inch ( 1mm ) Side detecting > 0.06 inch ( 1.5 mm ) Well you can't accuse him of false advertising. According to the above a 3mm sized grain would have to be 1mm from the tip or 1.5mm from the side before it will pick it up :) Even the freebee pinpointers from Kellyco does better then that!
		BLOG

andy		Posted : Tuesday, 5 February 2013 4:42:32 PM(UTC)
Rank: Gold Ingot Groups: Registered Joined: 13/12/2012(UTC) Posts: 471 Location: ngongotaha rotorua Thanks: 70 times Was thanked: 88 time(s) in 72 post(s)		Freeby pinpointers from kellyco
		ATpro ACE250 GC1010 teknetics Eurotek Pro

metalprobe		Posted : Tuesday, 5 February 2013 4:56:11 PM(UTC)
Rank: Gold Flake Groups: Registered Joined: 24/01/2012(UTC) Posts: 23 Location: hongkong Thanks: 2 times		Originally Posted by: Shilo Originally Posted by: metalprobe Gold Grain 0.12 inches / 3 mm ) depth: Tip detecting > 0.04 inch ( 1mm ) Side detecting > 0.06 inch ( 1.5 mm ) Well you can't accuse him of false advertising. According to the above a 3mm sized grain would have to be 1mm from the tip or 1.5mm from the side before it will pick it up :) Even the freebee pinpointers from Kellyco does better then that! hi Shilo You are the Professional hunter the probe 1mm from the tip or 1.5mm from the side should be the world best and I have sent 6PCs to US and EU and feedback is excellent I have the most sensitive probe can hunting Gold Grain 0.08 inches / 1 mm deepth: 1mm from the tip or 1.5mm from the side and this Model WMP is the king in pinpointer world and the probe is only for quantity order to sole distributor and you know Professional Probe need Professional services I believe Data and testing data has the last words and very important is metal probe is only 7.8 inch you should know short probe is difficult to get higher sensitivity I do not need to put AD here for the new day for pinpointer is coming and someone here need probe to testing TMP-A is OK but DHL charge???
		WWW

andy		Posted : Tuesday, 5 February 2013 5:05:55 PM(UTC)
Rank: Gold Ingot Groups: Registered Joined: 13/12/2012(UTC) Posts: 471 Location: ngongotaha rotorua Thanks: 70 times Was thanked: 88 time(s) in 72 post(s)		How about you send 6 peices over here to newzealand and we will give your product a fair review metalprobe??
		ATpro ACE250 GC1010 teknetics Eurotek Pro

Shilo		Posted : Tuesday, 5 February 2013 5:09:36 PM(UTC)
Rank: Gold Ingot Medals: Groups: Registered Joined: 29/01/2011(UTC) Posts: 573 Location: Kawhia Thanks: 17 times Was thanked: 285 time(s) in 185 post(s)		Don't forget the gold nuggets and the Lady of Ill Repute with loose morals to test them with!
		BLOG

metalprobe		Posted : Tuesday, 5 February 2013 5:25:11 PM(UTC)
Rank: Gold Flake Groups: Registered Joined: 24/01/2012(UTC) Posts: 23 Location: hongkong Thanks: 2 times		testing cardboard and put in probe box already
		WWW

Shilo		Posted : Tuesday, 5 February 2013 5:33:30 PM(UTC)
Rank: Gold Ingot Medals: Groups: Registered Joined: 29/01/2011(UTC) Posts: 573 Location: Kawhia Thanks: 17 times Was thanked: 285 time(s) in 185 post(s)		Originally Posted by: metalprobe testing cardboard and put in probe box already The ladies of ill repute will be complaining a bit about being put into a box wouldn't they??
		BLOG

andy		Posted : Tuesday, 5 February 2013 5:36:55 PM(UTC)
Rank: Gold Ingot Groups: Registered Joined: 13/12/2012(UTC) Posts: 471 Location: ngongotaha rotorua Thanks: 70 times Was thanked: 88 time(s) in 72 post(s)		Hahaha I'll setle for the lady of I'll repute with loose morals hahaha clasic.
		ATpro ACE250 GC1010 teknetics Eurotek Pro

metalprobe		Posted : Tuesday, 5 February 2013 5:46:53 PM(UTC)
Rank: Gold Flake Groups: Registered Joined: 24/01/2012(UTC) Posts: 23 Location: hongkong Thanks: 2 times		vedio testing pls read detail at http://www.tradesalon.com/goldprobe.html Edited by user Tuesday, 5 February 2013 5:50:11 PM(UTC) \| Reason: Not specified
		WWW

Lammerlaw		Posted : Tuesday, 5 February 2013 5:56:58 PM(UTC)
Rank: Gold Ingot Groups: Registered Joined: 24/05/2011(UTC) Posts: 1,721 Thanks: 72 times Was thanked: 579 time(s) in 396 post(s)		Originally Posted by: Shilo Originally Posted by: metalprobe testing cardboard and put in probe box already The ladies of ill repute will be complaining a bit about being put into a box wouldn't they?? The way I understood it is that they supply the box into which the probe is placed - for safety sake it is better to use one of the holsters that come with it when it is inserted into the box as this prevents the probe from being affected by exotic viruses. I also noted in one of Mr Metalprobes photos that he is electrocuting fish with it so I assume it also doubles as a poachers pocket probe for electro fishing - I should also imagine that the lady of ill repute and loose morals could find a use for it as well. All this might indicate that it is a utility tool with a multitude of uses, some of them nefarious. Mr Metalprobe - in all seriousness and jokes aside - even I would like to see how it compares with other similar products. If it proves in the field to be as good as competing products then I have no hesitation in saying that they would sell very well out here in Kiwiland and I would buy one myself.

Shilo		Posted : Tuesday, 5 February 2013 5:58:36 PM(UTC)
Rank: Gold Ingot Medals: Groups: Registered Joined: 29/01/2011(UTC) Posts: 573 Location: Kawhia Thanks: 17 times Was thanked: 285 time(s) in 185 post(s)		WHAT! you used it in a tank of fish!! Fish are ultra sensitive to electromagnetic fields - it is the ultimate in cruelty forcing a metal probe with vibrating capabilities onto them. You should be ashamed!!!
		BLOG

metalprobe		Posted : Tuesday, 5 February 2013 5:59:19 PM(UTC)
Rank: Gold Flake Groups: Registered Joined: 24/01/2012(UTC) Posts: 23 Location: hongkong Thanks: 2 times		Originally Posted by: andy How about you send 6 peices over here to newzealand and we will give your product a fair review metalprobe?? the fair report its impossible you konw during the past 10 years every detector factory has own agents and dealers no one willing to make fair report as competitor I have 60PCs TMP-A in stock You can buy 6PCs for market test and if the sensivitivty and specification is not the same as I said you can return Probe Handle: 7.8" ( 200 mm) Probe Pole: 40" Probe end dim.: 1.4cm (0.55 inches) Handle End: 4 cm (1.6 inches) Gold Grain 0.12 inches / 3 mm ) depth: Tip detecting > 0.04 inch ( 1mm ) Side detecting > 0.06 inch ( 1.5 mm )
		WWW

andy		Posted : Tuesday, 5 February 2013 6:11:51 PM(UTC)
Rank: Gold Ingot Groups: Registered Joined: 13/12/2012(UTC) Posts: 471 Location: ngongotaha rotorua Thanks: 70 times Was thanked: 88 time(s) in 72 post(s)		One will do and I will give you and you're company a nonbiased fair review of this product.
		ATpro ACE250 GC1010 teknetics Eurotek Pro

5 Pages12 3 >»