New Zealand Gold Prospecting & Metal Detecting Forums Archive

 

The forum has moved to community.paydirt.co.nz, see you there!

This forum is now an archive to preserve the knowledge and finds posted here.

5 Pages<12345>
andy  
Posted : Tuesday, 5 February 2013 11:07:03 PM(UTC)
andy

Rank: Gold Ingot

Groups: Registered
Joined: 13/12/2012(UTC)
Posts: 471
Australia
Location: ngongotaha rotorua

Thanks: 70 times
Was thanked: 88 time(s) in 72 post(s)
Your loss bud not ours!
ATpro
ACE250
GC1010
teknetics Eurotek Pro
metalprobe  
Posted : Tuesday, 5 February 2013 11:13:21 PM(UTC)
metalprobe

Rank: Gold Flake

Groups: Registered
Joined: 24/01/2012(UTC)
Posts: 23
Man
Location: hongkong

Thanks: 2 times
Originally Posted by: andy Go to Quoted Post
Your loss bud not ours!


do you have your own detector store?
do you have your own detector website and ( history )

UserPostedImage

UserPostedImageUserPostedImage
Lammerlaw  
Posted : Tuesday, 5 February 2013 11:57:10 PM(UTC)
Lammerlaw

Rank: Gold Ingot

Groups: Registered
Joined: 24/05/2011(UTC)
Posts: 1,721

Thanks: 72 times
Was thanked: 579 time(s) in 396 post(s)
I dont think your little cartoon of you flashing your arse to 'The West' has done you any favours - you might flash your arse to the West but the shower of Bird Shit thats going to descend on your head is more likely to cause such a stink that you will want to turn your metal probe into an abortion device and turn yourself inside out to hide from the retribution of two hundred thousand low flying Western seagulls who off load a nice white nuclear winter of radio active seagull shit after having first dined on Fukushima sardines so I would politely suggest that you hop down to your local shrine and have a wee talk to the god you were mentioning earlier about the chances of you being drowned under six and a half ton of seagull excrement.

I find though that what you say is great entertainment as you are the only fellow I have ever read who can actually make common English harder to read and understand than the hieroglyphics on a Mayan tomb wall and whose analogy between hand grenades, Oops metalprobes and cars is as relevant as a discussion on the mating characteristics of a Boa Constrictor at a board meeting in a Siberian Pea factory.

I like your sense of humour though - just love the photo of all the choice weapons but must assume that they are a veiled threat or cryptic message!

I can only assume also that the metal probe sinking down into the fish bowl is an admission of defeat and you have thrown in the towel...dont go...this is fun...just like a circus but no entry fee.

Edited by user Wednesday, 6 February 2013 12:02:34 AM(UTC)  | Reason: Not specified

metalprobe  
Posted : Wednesday, 6 February 2013 12:53:49 AM(UTC)
metalprobe

Rank: Gold Flake

Groups: Registered
Joined: 24/01/2012(UTC)
Posts: 23
Man
Location: hongkong

Thanks: 2 times
what's the best pinpointer for you to hunting easily ( mud, sand, water or even in rock )

1. can find Non-ferrous metals size dim. < 0.08 inch (2mm)
2. over lenght less than 7 inch ( 190 mm )
3. can underwater hunting with LED flashlight brightness can not be adjusted
4. can be longer than 40 inch with ABS pole
5. Probe end dim. < 0.50 inch (12mm)
6. Communicates with:
a. buzzer alarm
b. LED light ( green for power, red for warning )
c. Vibration alarm

Edited by user Wednesday, 6 February 2013 6:09:02 PM(UTC)  | Reason: Not specified

andy  
Posted : Wednesday, 6 February 2013 5:11:16 AM(UTC)
andy

Rank: Gold Ingot

Groups: Registered
Joined: 13/12/2012(UTC)
Posts: 471
Australia
Location: ngongotaha rotorua

Thanks: 70 times
Was thanked: 88 time(s) in 72 post(s)
I'll stick with garrett budy a trusted product since before you and you're analprobe.my md has pin point and its shaft is extendable to longer than 40 inches and has head phones so I'm sweet as mate.
ATpro
ACE250
GC1010
teknetics Eurotek Pro
simon  
Posted : Wednesday, 6 February 2013 9:44:02 AM(UTC)
simon

Rank: Gold Ingot

Groups: Registered
Joined: 7/01/2011(UTC)
Posts: 789
Man
Location: Central Otago

Thanks: 33 times
Was thanked: 239 time(s) in 150 post(s)
in all seriousness the ground here is so rock hard any sort of probe would have a stuggle to get into the ground. you'd have to dig and loosen the ground up just to use the thing. think i will stick to my trusty $3 plastic scoop thanks.

as for all the cartoons, thats pretty offputting.

i'm not sure if winnie the pooh appreciates a modified pic of himself showing a probe inserted up his ass either.

as for the pic showing live ammo - i sure as hell wouldn't want to be ramming a probe or anything for that matter down into the ground where there is live ammo.

nuf said.
Lammerlaw  
Posted : Wednesday, 6 February 2013 9:58:35 AM(UTC)
Lammerlaw

Rank: Gold Ingot

Groups: Registered
Joined: 24/05/2011(UTC)
Posts: 1,721

Thanks: 72 times
Was thanked: 579 time(s) in 396 post(s)
Thanks Simon - I have had a bit of a problem with my memory these last 24 hours thinking to myself 'Where in hell have I seen that blasted Bear before' - Winnie and Pooh.

My probe is far superior Mr Metalprobe - it can extend to four times its length does not require batteries and is so sensitive that it responds to visual sightings of the target object.

You dont get it do you Mr Metalprobe - dont waste your time - Shout yourself a trip to Kiwiland and bring your devices for a promotional tour OR send one for testing OR appoint a Kiwiland Agent. Bring your sister - or wife as I am not too fussy - and I will demonstate my pinpointer - she will then verify its efficiency for you.

You will never ever sell your product sight unseen and unproven - all you have to do is allow us to test it and then one of us might act as an agent for you on commission and you might sell a great many but your sales pitch is not doing yourself any favours...we need to KNOW what we are buying before we buy and to know the object is to see and test it for ourselves.

The answer is as easy as shooting fish in barrels - send it for testing at your expense and if we have faith in your product we will buy.

PS - We note that the 'Board of International Patent and Copyright Infringements' centred in London is investigating your misuse of Winnie the Pooh so if I was you I would remove him quickly.

Edited by user Wednesday, 6 February 2013 10:36:43 AM(UTC)  | Reason: Not specified

Shilo  
Posted : Wednesday, 6 February 2013 10:07:41 AM(UTC)
Shilo

Rank: Gold Ingot

Medals: Donation: Made a donation helping cover the running costs of the site - thank you :)

Groups: Registered
Joined: 29/01/2011(UTC)
Posts: 573
Location: Kawhia

Thanks: 17 times
Was thanked: 285 time(s) in 185 post(s)
Pinpointer size will over 8 inch

Metal Probe less than 7 inch


You might want to use correct terms to be understandable. For example the word "Pinpointer" is a generic word that refers to any metal detector used to find objects within a few inches. Your "Metal Probe" is a pinpointer. Now if you are meaning the Garrett Propointer which is the most popular selling pinpointer then it is 9" long but a lot more rugged then what yours look like.

Pinpointer on land use

Metal Probe can be underwater hunting


Some simple customisation can make a Propointer waterproof, and there are also good reputable products like the Vibroprobe on the market that are designed for underwater use.

Pinpointer can not extend to 12 inch

Metal Probe can be longer than 40 inch with ABS pole


This defeats the purpose of a pinpointer! A detector finds the target the pinpointer is only used to zoom in on its exact location. Why would I want a 40" long pinpointer??

the pinpointer can not use headphone

Metal Probe with wireless headphone


Again why? We use headphones with the detectors so we can hear faint signals. What a hassle having to take the detector headphones off and put on the pinpointer ones with each target. A completely useless idea.

the pinpointer flashlight brightness can not be adjusted

Metal Probe flashlight brightness can be adjusted for any condition


Again what's the point? If detecting in the dark I wear a headlamp anyway. Yes the Garrett Propointer has a light but it is more then powerful enough to see a target in a hole, no reason to use even more battery power.

You see the difference between your "Metal Probe" and a pinpointer like the Garrett Propointer (or the Minelab Profinder) is that these ones are designed by people knowledgeable in metal detecting, not by somebody who thinks they will just throw this or that in the design but have no idea of the hobby.

Edited by user Wednesday, 6 February 2013 10:10:07 AM(UTC)  | Reason: Not specified

Shilo  
Posted : Wednesday, 6 February 2013 10:57:20 AM(UTC)
Shilo

Rank: Gold Ingot

Medals: Donation: Made a donation helping cover the running costs of the site - thank you :)

Groups: Registered
Joined: 29/01/2011(UTC)
Posts: 573
Location: Kawhia

Thanks: 17 times
Was thanked: 285 time(s) in 185 post(s)
Oh by the way one question:

Have you ever used your "Metal Probe" yourself and if so evidence?

And by evidence I don't mean recycled images plucked from the web, but yourself with legitimate finds. I somehow doubt you even live in a area which is not surrounded by concrete - if you did you would know (as Simon & Gavin refers to above) that the only way anything will penetrate soil is if it had a sharp point and was hammered in and that is for soft soil not what the majority of it is like.
rgmcbrid  
Posted : Wednesday, 6 February 2013 12:56:25 PM(UTC)
rgmcbrid

Rank: Gold Ingot

Groups: Registered
Joined: 3/06/2010(UTC)
Posts: 583
Man
Location: Southland

Thanks: 23 times
Was thanked: 180 time(s) in 140 post(s)
Quote:
PS - We note that the 'Board of International Patent and Copyright Infringements' centred in London is investigating your misuse of Winnie the Pooh so if I was you I would remove him quickly.


I suspect they would be more interested in the electronics which are no doubt a poor copy of someone elses product.
metalprobe  
Posted : Wednesday, 6 February 2013 3:16:40 PM(UTC)
metalprobe

Rank: Gold Flake

Groups: Registered
Joined: 24/01/2012(UTC)
Posts: 23
Man
Location: hongkong

Thanks: 2 times
Originally Posted by: simon Go to Quoted Post
in all seriousness the ground here is so rock hard any sort of probe would have a stuggle to get into the ground. you'd have to dig and loosen the ground up just to use the thing. think i will stick to my trusty $3 plastic scoop thanks.----------


Pinpointer need dig and loosen the ground first than detecting

Metal Probe can push into the ground first then use special hook to get the metal

UserPostedImage
metalprobe  
Posted : Wednesday, 6 February 2013 3:26:57 PM(UTC)
metalprobe

Rank: Gold Flake

Groups: Registered
Joined: 24/01/2012(UTC)
Posts: 23
Man
Location: hongkong

Thanks: 2 times
Originally Posted by: Shilo Go to Quoted Post

--------Some simple customisation can make a Propointer waterproof, and there are also good reputable products like the Vibroprobe on the market that are designed for underwater use. ---------


Vibroprobe only Vibration warning

Metal probe Communicates with:
a. buzzer alarm
b. LED light ( green for power, red for warning )
c. Vibration alarm

Note:please contact with pinpointer factory when the over length is less than 8 inch what will happen when power ON (^-^)

UserPostedImage

Edited by user Wednesday, 6 February 2013 4:14:01 PM(UTC)  | Reason: Not specified

metalprobe  
Posted : Wednesday, 6 February 2013 3:34:17 PM(UTC)
metalprobe

Rank: Gold Flake

Groups: Registered
Joined: 24/01/2012(UTC)
Posts: 23
Man
Location: hongkong

Thanks: 2 times
I just listed 10% difference between pinpointer and metal probe

over 90% components are exclusive production and hand made just like Italian handmade shoes

copy is not easy think about labor cost and metal probe is developing without stop

Edited by user Wednesday, 6 February 2013 3:36:22 PM(UTC)  | Reason: Not specified

Lammerlaw  
Posted : Wednesday, 6 February 2013 3:37:32 PM(UTC)
Lammerlaw

Rank: Gold Ingot

Groups: Registered
Joined: 24/05/2011(UTC)
Posts: 1,721

Thanks: 72 times
Was thanked: 579 time(s) in 396 post(s)
Pidgeon English from New Guinea area - 'Big Fella yabber yabber watch im that one'

Bring the blasted thing out here Mr Metalprobe and PROVE to us that it works - you are totally wasting your time - Is your sister by any chance a Dancing girl?

Who in Hades wants to dig and loosen three square miles of countryside before detecting and even then you have as much chance of pushing that thing into the ground as you have of pushing marbles up a Rotweillers arse with a red hot fire poker and as for it being able to hook the object out of the ground - your claims are getting more preposterous by the hour.

If you like to give us your address I will send my pen pal Wang Dong Pong to examine your wares with a view to testing it out.

Being honest I have to admit that I would genuinely like to see it in action but none of us here in Kiwiland are as gullible as the Eskimos who bought a container load of freezers to store their seal blubber in so I respectfully suggest you send your sister over to demonstrate your metal probe OR send a sample for testing or appoint a New Zealand agent.

Your persistence has to be admired but the fact that you dont seem to get the message makes me think that you are a sandwich short of a picnic, as thick as two short planks and only nineteen and eleven pence in the pound.

Edited by user Wednesday, 6 February 2013 3:39:11 PM(UTC)  | Reason: Not specified

Lammerlaw  
Posted : Wednesday, 6 February 2013 3:43:57 PM(UTC)
Lammerlaw

Rank: Gold Ingot

Groups: Registered
Joined: 24/05/2011(UTC)
Posts: 1,721

Thanks: 72 times
Was thanked: 579 time(s) in 396 post(s)
Originally Posted by: metalprobe Go to Quoted Post
I just listed 10% difference between pinpointer and metal probe

over 90% components are exclusive production and hand made just like Italian handmade shoes

copy is not easy think about labor cost and metal probe is developing without stop


I would sure agree that 90% of components are hand made - probably in a backyard sweat shop by starving child labour in the back streets of Beijing.

You say "copy is not easy think about labor cost " - who in hell do you think you are trying to bullshit - the Chinese are the worlds master of copying and some of it IS extremely good BUT we dont know if yours is good or rubbish because you will not bring one for demonstration or send one for comparison testing.

Labour costs in China - Labour in China costs NOTHING and that is why many Western World businesses have factories in China.


metalprobe  
Posted : Wednesday, 6 February 2013 3:48:30 PM(UTC)
metalprobe

Rank: Gold Flake

Groups: Registered
Joined: 24/01/2012(UTC)
Posts: 23
Man
Location: hongkong

Thanks: 2 times
Originally Posted by: Lammerlaw Go to Quoted Post
-------------
If you like to give us your address I will send my pen pal Wang Dong Pong to examine your wares with a view to testing it out. ---------------


Do not waste of your time to write long message the real business man never send quote or order over 40 words

Probe Specification is different - sale to Asia / US / EU only dealer who run detector over 5 years can get metal probe and must pay for samples this is our business regulation

and I only talk with TradeSalon.com member face to face you konw I am very busy

Edited by user Wednesday, 6 February 2013 4:26:15 PM(UTC)  | Reason: Not specified

andy  
Posted : Wednesday, 6 February 2013 3:55:06 PM(UTC)
andy

Rank: Gold Ingot

Groups: Registered
Joined: 13/12/2012(UTC)
Posts: 471
Australia
Location: ngongotaha rotorua

Thanks: 70 times
Was thanked: 88 time(s) in 72 post(s)
Special hook device hahaha this thing realy could be used for electro fishing hahaha.oi mr metal probe there's. Fella in australia that will be interested in one of these his name is rex hunt...
ATpro
ACE250
GC1010
teknetics Eurotek Pro
Lammerlaw  
Posted : Wednesday, 6 February 2013 4:17:25 PM(UTC)
Lammerlaw

Rank: Gold Ingot

Groups: Registered
Joined: 24/05/2011(UTC)
Posts: 1,721

Thanks: 72 times
Was thanked: 579 time(s) in 396 post(s)
Originally Posted by: metalprobe Go to Quoted Post
Originally Posted by: Lammerlaw Go to Quoted Post
-------------
If you like to give us your address I will send my pen pal Wang Dong Pong to examine your wares with a view to testing it out. ---------------


Do not waste of your time to write long message the real business man never send quote or order over 40 words

Probe Specification is different - sale to Asia / US / EU only dealer who run detector over 5 years can get metal probe and must pay for samples this is our business regulation



Dont tell me what to do Mr Metalprobe otherwise you might find the Kempai Tai on your doorstep with the repro man to confinscate your wares for false advertising!

As for writing long messages - dont worry about it - I do the worrying on my behalf - you just sit back and relax and send your sister out with the free sample and we will all be happy.

As for the 'Real businessman' - you sure in hades are not one otherwise you would have arranged for your goods to be tested by a reliable agent in New Zealand by appointing an agent, sending one for evaluation and then sitting back to watch the profit roll in.

Now you think about this Mr Metalprobe - at the moment Garrett and other brands are selling in New Zealand like hot cakes and each one of any other brand that sells is one less potential sale for you while you sit back and waste YOUR time (not mine) trying to use high pressure sales techniques to sell your wares and making false claims into the bargain. They might be better buys than other brands but we do NOT know that until we try one to see for ourselves.

The Real Businessman also never engage in long winded diatribes - they do things the RIGHT way and sell their products SUCCESSFULLY!

So far I can see a great deal of potential for them as a utility tool - maybe a pinpointer after you have located the gold first, definitely a fish stunning electrofisher, a good vibrating pleasure device for homosexuals and dancing girls and with the hook on the end could be used for fishing unwanted buns out of the oven.
If all else fails send them to Afghanistan and sell them to the Taliban as rifle grenades or maybe convert them to parachute flares and sell to boaties.

Could be very versatile things those 'metalprobes'

Now if YOU want to be a good businessman and dont want to waste YOUR time go about things the right way...now be a good boy and go sell prawn crackers on the street corner for a year then come back and have another go at selling Metalprobes AFTER you have appointed a New Zealand agent and had them evaluated out here.

Edited by user Wednesday, 6 February 2013 4:26:53 PM(UTC)  | Reason: Not specified

Guardian  
Posted : Wednesday, 6 February 2013 4:27:57 PM(UTC)
Guardian

Rank: Gold Ingot

Groups: Registered
Joined: 30/10/2011(UTC)
Posts: 716
Man
New Zealand
Location: Dunedin

Thanks: 42 times
Was thanked: 222 time(s) in 185 post(s)
I would think that by now you would have realized that the time you have spent replying to our posts would have been better spent in the research and development of your future devices(or the creation of your first). You could have simply sent 1 unit to the Administrator to evaluate and of course they could have allowed the Dealers on this forum to compare products. You have let yourself and your products down as if this product was good people might actually buy the more expensive products you have on your Website.

This didn't work for you the first time you tried this and doesn't look very promising for you now.
Usually items like these flood ebay but nothing there and no reviews on any other forum that I have seen, I wonder why?
Shilo  
Posted : Wednesday, 6 February 2013 4:42:39 PM(UTC)
Shilo

Rank: Gold Ingot

Medals: Donation: Made a donation helping cover the running costs of the site - thank you :)

Groups: Registered
Joined: 29/01/2011(UTC)
Posts: 573
Location: Kawhia

Thanks: 17 times
Was thanked: 285 time(s) in 185 post(s)
Originally Posted by: Shilo Go to Quoted Post
Oh by the way one question:

Have you ever used your "Metal Probe" yourself and if so evidence?

And by evidence I don't mean recycled images plucked from the web, but yourself with legitimate finds. I somehow doubt you even live in a area which is not surrounded by concrete - if you did you would know (as Simon & Gavin refers to above) that the only way anything will penetrate soil is if it had a sharp point and was hammered in and that is for soft soil not what the majority of it is like.


Still waiting for an answer on the above. To make it simple since long posts seem to cause you problems:

Have you ever used your "Metal Probe" yourself and if so evidence?
5 Pages<12345>